International Standard Search
   
    Standard Data >> By Keyword [astm], >>>Search Results - Total [ 646 ] data were found.
ASTM A 226M-88/ASME SA 226/ELECRTIC RESISTANCE WELDED CARBON STEEL BOILER AND SUPERGEATER/TUBES FOR HIGH PRESSURE SERVICE/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel, boiler and superheater tubes for high-pressure service./

ASTM A53 / ASME SA53 / Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A106 / ASME SA106 / Seamless Carbon Steel Pipe for High Temperature Service
American National Standard for Welded and Seamless Wrought Steel Pipe
(ANSI/ASME B36.10m-1985)1
ASTM A135-89a / ASME SA135-89a PIPE STEEL ELECTRIC FUSION(ARC) WELDED(ASTM A 135-89 a / ASME SA 135-89 a /ASTMA135-89a/ASMESA135-89a)This standard is issued under the fixed designation A 135; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ) indicates an editorial change since the last revision or reapproval.This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense.
ASTM B-241 / ASME SB-241 /SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE
AND SEAMLESS EXTRUDED TUBE /This specification covers aluminm and aluminum-alloy seamlesspipe in the alloy (Note 1) and tenpers shown in Table 2 [Table 2M] and extruded roind reamless tube in the alloys and tempers shown in Table 3 [Table 3M] intended for pressure applicaoins.The standard sizes for seamless pipe are lidted in Table 16.7 of ANSI H35.2M. Nonstandard alloys, tempers and sizes of pipe are priduced as seamless extruded tube./
BS 3602-2 /STEEL PIPES AND TUBES FOR PRESSURE PURPOSES : CARBON AND CARBON MANGANESE STEEL WITH SPEIFIED ELEVATED TEMPERATURE PROPERTIES /PART2-87 SUBMEGRED ARC WELDED TUBES /specification for longitudinally arc welded tubes requirements for plain end tubes
Material standard No. (ASTM Standard)
ASTM A 135-89a / ASME SA 135-89a/PIPE STEEL ELECTRIC FUSION(ARC) WELDED /1.1 This specification covers two grades of electric-resistance-welded steel pipe in NPS 2 TO NPS 30 inclusive, with nominal (average) wall thickness up to 0.500 in. ( 12.70 mm), inclusive, and in nominal sizes 3/4 to 5 in. (19 to 127 mm) inclusive with nominal (average) wall thickness 0.083 in. (2.11 mm) to 0.314 in. (3.40 mm), depending on size.Pipe having other dimensions 9Note 1) may be furnished provided such pipe complies with all other requirements of this specification. The pipe in intended for conveying liquid, gas, or vapor; and only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes in somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. T he pipe may be furnished either nonexpanded or cold expanded, the amount of expansion shall not exceed 1.5 of the outside diameter pipe size./
ASTM A161 / ASME SA 161/SEAMLESS LOW CARBON AND CARDON MOLYBDENUM STEEL STILL TUBES/FOR REFINERY SERVICE/1.1 This specification covers minimum-wall-thickness, seamless, hot-finished and cold-finished, low-carbon and carbon-molybdenum steel still tubes, for use in carrying fluids at elevated temperatures and pressures in various types of heaters, in which the tubes may be subjected to furnace temperature higher than that of the contained fluid./
ASTM A 178 / ASME SA 178/ELETRIC RESISTANCE WELDED CARBON STEEL BOILER TUBES/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes, boiler flues, superheater flues, and safe ends./
ASTM A179M-88a / ASME SA 179/SEAMLESS COLD DRAWN LOW CARBON STEEL HEAT EXCHANGER/AND CONDENSER TUBES/1.1 This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus./
ASTM A 192M-89 / ASME A 192 /SEAMLESS CARBON STEEL BOILER TUVES FOR HIGH PRESSURE SERVICE /1.1 This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service./
ASTM B-407-87 / ASME SB-407 /SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY SEAMLESS PIPE AND TUB/This specification covers UNS N08800, UNS N08801, UNS N08810,and UNS N08811 in the form of cold-worked and hot-finished annealed seamless pipe and tube. Alloy UNS N08810 is normally emloyed in service temperatures up to and including 1100F (593). Alloys UNS N08811 are normally employed in service temperatures above 1100F (593) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperatue range./
ASTM A200-89/SEAMLESS iNTERMEDIATE ALLOY STEEL STILL TUBES FOR FEFINERY SERVICE/1.1This specification covers several grades of minimum-wall-thickness, chromium-molybdeumand chromium-mo-lybdenum-silicon,seamless, hot-finished and cold-finished,intermediate alloy-steel still tubes, for use in carrying fluids at elevated temperaures and presures in various types of heaters, in which the tubes may be subjected to a furnace temperature higher than that of the contained fluid./
ASTM A209M-88 / ASME SA 209/SEAMLESS CARBON MOLYBDENUM ALLOY STEEL BOILER/AND SUPERGEATER TUBES/1.1 This specification covers several grades of minimun-wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and superheater tubes./
ASTM A210M-88/ASME SA 210/SEAMLESS MEDIUM CARBON STEEL BOILER AND SUPERHEATER TUBES/1.1 This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including safe ends (Note 1), arch and stay tubes, and superheater tubes./
ASTM A 211-85/ASME SA 211/SPIRAL WELDED STEEL OR IRON PIPE/
ASTM A 213M-89a/ASME SA 213/SEAMLESS FERRITIC AND AUSTENITIC ALLOY STEEL BOILER SUPERHEATER AND/HEAT EXCHANGER TUBES/1.1 This specification covers minimum-wall-thickness, seamless ferritic and austenitic steel, boiler and superheater tubes and austenitic steel heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2, respectively./
ASTM A 214M/ASME SA 214/ELECTRIC RESISTANCE WELDED CARBON STEEL HEAT EXCHANGER/AND CONDENSER TUBES/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus./
ASTM A 216 / ASME SA 216/Carbon Steel Castings Suitable for Fusion for High Temperature Service/
|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|32|33|

    Standard Data >> By keyword [astm], >>>Search Results - Total [ 646 ] data were found.

Information Center.
Register as a member of e-pipe Registration your Company Information.

With e-pipe, Make a New Business
Advertising and Operating activities, any more you don't have to wait Marketing Result.
Using our companies information management database and open e'market.