International Standard Search

DIN

Deutsches Institut für Normung

50x50

The remit of DIN German Institute for Standardization is to encourage, organize, steer and moderate standardization and specification activities in systematic and transparent procedures for the benefit of society as a whole, while safeguarding the public interest
.

DIN

DIN1615 / Welded Circular Unalloyed Steel Tubes Not Subject To Special Requirements Stock Company
DIN1626 / Welded Circular Tubes of Non Alloy Steels with Special Quality Requirements (USt37.0/St37.0/St44.0/St52.0) Stock Company
DIN1628 / Welded Circular Tubes of Non Alloy Steels with Very High Quality Requirements (St37.4/St44.4/St52.4) Stock Company
DIN1629 / Seamless Circular Tubes of Non Alloy Steels with Special Quality Requirements
(St 37.0/St 44.0/St 52.0/1.0254/1.0256/1.0421)
Stock Company
DIN1630 / Seamless Circular Tubes of Non Alloy Steels with Very High Quality Requirements
(St 37.4/St 44.4/St 52.4/1.0255/1.0257/1.0581)
Stock Company
DIN2391-1 / Seamless Precision Steel Tubes(St30Si/St30A1/St35/St45/St52) Stock Company
DIN2391-2 / Seamless Precision Steel Tubes(St30Si/St30A1/St35/St45/St52) Stock Company
DIN2393-1 / Welded Precision Steell Tubes
(St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)
Stock Company
DIN2393-2 / Welded Precision Steell Tubes
(St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)
Stock Company
DIN2394-1 / Welded And Sized Precision Steel Tubes
(St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)
Stock Company
DIN2394-2 / Welded And Sized Precision Steel Tubes
(St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)
Stock Company
DIN2395-1 / Rectangular and Square Electric Welded Precision Steel Tubes Stock Company
DIN2395-2 / Rectangular and Square Electric Welded Precision Steel Tubes
(St 34.2/St 37.2/St 52.3)
Stock Company
DIN2395-3 / Rectangular and Square Electric Welded Precision Steel Tubes Stock Company
DIN2402 Pipelines Nominal Widths efinition Grading Pipework
grading of nominal sizes
Stock Company
DIN2403 Marking of pipes according to fluid transported Stock Company
DIN2413 Part1 Design of steel pressure pipes Stock Company
DIN2413 Part2 Design of steel bends used in pressure pipelines Stock Company
DIN2440 / Steel Tubes Medium Weight Suitable for Screwing (St33.2) Stock Company
DIN2441 / Steel Tubes Heaby Weight for Suitable for Screwing(St33.2) Stock Company
DIN2444 / Zinc Coatings on Steel Tubes Stock Company
DIN2445-1 / Seamless Steel Tubes for Dynamic Loads Hot Finished Tubes Nominal
Pressures 100 to 400
Stock Company
DIN2445-2 / Seamless Steel Tubes for Dynamic Loads Basis for Caluculation of
Straight Tubes
(St 35,4/St 52,4)
Stock Company
DIN2448 / Seamless Steel Pipes and Tubes Stock Company
DIN2449 / Seamless Steel Pipes and Tubes Stock Company
DIN2450 / Seamless Steel Tubes in St 35 Dimensions and Range of ApplicationTION Stock Company
DIN2458 / Welded Steel Pipes and Tubes Stock Company
DIN2460 / Steel Pipes for Water Pipelines Stock Company
DIN2462 / Seamless Tubes Of Stainless Steel
(1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN2463 / Weldel Tubes of Austenitic Stainless Steel (X5CrNi189/X2CrNi189/X5CrNiMo1810/X2CrNiMo1810/X2CrNiMo1812/
X5CrNiMo1812/X10CrNiTi189)
Stock Company
DIN2916 Bending Radii for seamless and Welded Steel Tubes Stock Company
DIN2917 Seamless steel tubes for superheated pipelines and headers Stock Company
DIN17100 / Steels for General Structural Purposes
(St33/St37.2/USt37.2/RSt37.2/St37.3/St44-2/St44-3/St50-2/St60-2/St52-33/St50-2/St60-2/St70-2)
Stock Company
DIN17102 / Weldable Normalized Fine Grain Structural Steels (StE255/WStE255/TStE255/EStE255/StE285/WStE285/TStE285/EStE285/) Stock Company
DIN17119 / Welded Cold Formed Square And Rectangular Steel Tubes for Structural Steel work
(USt 37-2/RSt 37-2/St 37-3/St 44-2/St 44-3/St 52-3/WTSt 37-2/WTSt 37-3/WTSt 52-3)
Stock Company
DIN17120 / Welded Circular Steel Tubes for Structural Steelwork
(USt37-2/RSt37-2/St37-2/St44-2/St44-3/St52-3)
Stock Company
DIN17121 / Seamless Circlar Steel Tubes for Structural Steelwork
(RSt37-2/St37-3/St44-2/St44-3/St52-3)
Stock Company
DIN17123 / Welded Circular Fine Grain Steel Tubes for Structural Steelwork (StE225/TStE255/EStE255/StE285/StE355/TStE355/EStE355/StE420/TStE420/EStE420) Stock Company
DIN17124 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for Hig Temperatur Service (StE255/TStE255/EStE255/StE285/TStE285/EStE285/
StE355/TSTE355/EStE355/StE420/TStE420/EStE420)
Stock Company
DIN17172 / Steel Pipes for Pipe Lines for the Transport of Combustible Fluids and Gases (StE210.7/StE240.7/StE290.7/StE320.7/StE360.7/StE385.7/
StE415.7/StE290.7TM/StE207.7TM/StE360.7TM)
Stock Company
DIN17173 / Seamless Circular Tubes Made From Steels with Low Temperature Service (TSt35N/TSt35V/26CrMo4/11MnNi53/13MnNi63/10Ni14/12Ni19/X8Ni19) Stock Company
DIN17174 / Seamless Steel Tubes for Elevated Temperatures
(TTSt 35 N/TTSt 35 V/11 MnNi 5 3/13 MnNi 6 3/10 Nl 14/12 Nl 19/X 8 Ni 9/1.0356/1.6212/1.6217/1.5637/1.5680)
Stock Company
DIN17175 / Electricall Resitance Or Induction Weled Steel Tubes for Elevated Temperature (St35.8/St45.8/17Mn4/19Mn5/15Mo3/13CrMo910/10CrMo910/14MoV63/X20CrMoV121) Stock Company
DIN17176 Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures Technical delivery condition Stock Company
DIN17177 / Electrically Resitance or Induction Welded Steel Tubes for Elevated Temperature (St37.8/St42.8/15Mo3) Stock Company
DIN 17178 Welded circular fine grain steel tubes subject to special requirements Technical delivery conditions Stock Company
DIN 17179 Seamless circular fine grain steel tubes subject to special requirements Technical delivery conditions Stock Company
DIN17455 / General Purpose Welded Circular Stainless Steel Tubes
(Round Pipe) ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN17455 / General Purpose Welded Circular Stainless Steel Tubes
(Square.Rectangular Pipe) ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN17456 / General Purose Seamless Circular Stainless Steel Tubes
( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN17457 / Welded Circular Austenitic Stainless Steel Tubes Subject to Special Requirements
( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN17458 / Seamless Circular Austenitic Stainless Steel Tubes Subject to Special Requirements
(1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)
Stock Company
DIN17671 / Wrought Copper and Copper Alloy Tubes Properties Stock Company
DIN 59410 Hollow Sections for Structural Steel Engineering ot Formed Square and
Rectangular Steel Tubes Dimensions, Weights, Perissible Deviations, Static Values
Stock Company
DIN 59411 Hollow Sections for Structural Steel Engineering Cold Formed Welded
Square and Rectangular Steel Tubes Dimension, Weights, Permissible Deviations,
Static Values
Stock Company


(Square.Rectangular Pipe) (Round Pipe)

Register as a member of e-pipe Registration your Company Information.

Any more you don't have to wait Marketing Result.
Using our companies information management database - Open e'market. and Advertising,Operating activities.
With e-pipe, Make a New Business.